Racing Beat RX-8 RENESIS 6 Port Street Porting Templates

Description The Racing Beat Street -Port Intake & Exhaust Templates allow you to undertake your own intake and exhaust porting efforts on all model years of the high-power 6-Port Renesis 13B engine. These porting templates are traced from Racing Beat’s own master templates, which are the result of years of research and development. The actual port shapes are traced on thin sheets of aluminum which you must first cut out, testing your ability to use a die grinder effectively before attempting to port an expensive engine component. The finished template is held in place with tubular dowels and the porting shape is then traced onto each housing. Included with the Renesis porting templates are Racing Beat’s exclusive detailed instructions and advice to guide you through your porting efforts. Limited clearance on the 6-Port Renesis side housings creates additional challenges when porting these housings, our instructions provide detailed photos of the most critical areas of concern. If you have never ported a rotary engine before we would strongly recommend getting hold of some scrap engine parts to practice on. Porting templates are where even the most experienced builders started. They offer a safe port and when done properly will offer minimal additional risk to your new engine.