Racing Beat Front & Rear Anti Roll Bar Set for RX-8 & MX-5

Description Possibly the best value for money handling upgrade you can get, Sway Bars are often overlooked when upgrading the handling of your car. Racing Beat-designed sway bars reduce chassis roll during cornering and increases your car’s sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components. The diameter of the RB front tubular bar is 1.25″ (32mm) x .1875″ wall thickness, as compared to the stock 1.05″ (27mm) x .134″ wall thickness front bar. An additional feature of the front bar is a pair of OEM style “stoppers” to prevent the bar from sliding sideways in the bar bushings during heavy cornering effort. The diameter of the rear tubular bar is .75″ (19mm) x .125″ wall thickness, as compared to the stock .632″ (16mm) x .097″ wall thickness rear bar. An additional feature of the rear bar is a pair of OEM style “stoppers” to prevent the bar from sliding sideways in the bar bushings during heavy cornering effort. The Racing Beat Sway Bar Package includes:  1 x Front Tubular Sway Bar 1 x Rear Tubular Sway Bar 1 x Front Bush and Hardware Package 1 x Rear Bush and Hardware Package 1 x Installation Instructions Each bar is supplied with replacement urethane bushings, bar clamps, Prothane grease and installation instructions. Front Tubular Sway Bar – 2004-11 RX-8 Application The diameter of the RB front tubular bar is 1.25″ (32mm) x .1875″ wall thickness, as compared to the stock 1.05″ (27mm) x .134″ wall thickness front bar. An additional feature of the front bar is a pair of OEM style “stoppers” to prevent the bar from sliding sideways in the bar bushings during heavy cornering effort. Each bar is supplied with replacement urethane bushings, bar clamps, Prothane grease and installation instructions.    As presently manufactured, this RX-8/MX-5 Tubular design utilizes a one-hole attachment point on either end. Rear Tubular Sway Bar – 2004-11 RX-8 Application The diameter of the rear tubular bar is .75″ (19mm) x .125″ wall thickness, as compared to the stock .632″ (16mm) x .097″ wall thickness rear bar. An additional feature of the rear bar is a pair of OEM style “stoppers” to prevent the bar from sliding sideways in the bar bushings during heavy cornering effort. Each bar is supplied with replacement urethane bushings, Prothane grease and installation instructions. (The original OEM bar clamps are retained for use with this bar.) This RX-8/MS-5 Tubular design utilizes two attachment points on each bar end. During test sessions using racing beats Racelogic VBox GPS data acquisition system, we recorded noticeable handling improvements after the installation of the Racing Beat sway bar set. Using the stock wheel/tire/ combination on our 2004 RX-8, we recorded the following cornering forces: Stock Bars: .86-.87g Racing Beat Bars: .89-.90g All Racing Beat sway bars are finished with a distinctive, red powder coating that provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!