Description The GReddy turbo kit is designed to fit the 2003-2008 Series 1 RX-8 while primarily meant for the high power 231ps RX-8 this kit can be adapted to work with the 192 version also. Further changed could be made for it to work on the later R3. The GReddy RX-8 Turbo kit is a bolt-on turbo kit which comes with everything you need including the following parts: GReddy T618Z turbo with internal wastegate (Set to run 5 psi.)Cast turbo manifold Cast turbo manifold Cast turbo downpipe Aluminium intake pipe with intake filter Intercooler Intercooler piping GReddy E-manage Ultimate with wiring adapter means no wire cutting to your stock ECU harness. All the misc. hardware The turbo kit is set to run 5 psi out of the box. This is a safe boost level. With other fuel system support and engine modification, the turbo is good to run up to 20 psi with a boost controller. The E-manage comes pre-programmed. GReddy claims 60 rear wheel HP gain from the turbo kit out of the box. 60 rear wheel horsepower was achieved on Greddy’s test cars. The actual horsepower will vary from car to car. Further tuning of the E-Manage Ultimate with the E-manage laptop software may result in improved HP gain. Essex Rotary recommend this kit is professionally installed and tunes but to the nature of converting an N/A RX-8 to Turbo. some applications may require revision of the original installation instructions. This is the JDM kit designed and build for the RHD RX-8 NOT the LHD kit from the USA This item is special order only, and is subject to our Special order T&C’s It cannot be canceled once your order is placed. Usual lead times are 4-6 weeks from Japan. THIS ITEM IS NOW DISCONTINUED PLEASE CONTACT US ABOUT OUR CUSTOM BUILD TURBO KITS, IF YOU ARE INTERESTED IN BOOSTING YOUR RX8
