Description This high-accuracy fuel pressure gauge is suitable for all fueling applications. It features an acrylic lens with a silicone filled dial that reads from 0 to 100psi (0 to 6.9 BAR) with /- 2% accuracy. The silicone fluid prevents the needle from vibrating for easy pressure readings. The internal bubble is normal. Rugged stainless 1-5/8″ OD steel case (1-3/4″ OD bezel) with nickel plated male 1/8″ NPT fitting. Available with black bezel and housing only. NOTES: 1. The internal silicone bubble is normal. 2. Overpressurizing can permanently misalign the needle calibration. 3. PTFE thread sealant paste should always be used on NPT threads. Variations with adapters are available in the following configurations. 20-0075 – 100 psi gauge with 8AN-ORB Adapter – allowing you to mount your gauge directly in to radium fuel rails accessory or end ports 20-0407 – 100 psi gauge with 90 degree male to female 1/8NPT Adaptor allowing you to mount your gauge at right angles to your pressure port in say a regulator, fuel line or rail. 20-0386 – 100 psi gauge with both the above adapters, this will allow you to install your gauge in to a fuel rail accessory port but position the face of your gauge at right angles to the port opening.
